Tag Archives: energy

Liquefied Petroleum Gas (LPG) Market Trends, Sales and Consumption Status Report By 2024

26th December 2019 – ****** Liquefied Petroleum Gas (LPG) Market is expected to reach USD 147.76 billion by 2024. Liquefied Petroleum Gas (LPG) is also termed as liquid petroleum gas (LP gas) or autogas. It is a flammable hydrocarbon gas comprising butane, propane, and mixture of these gases. It may be a by-product of crude oil refining and natural gas processing. The Liquefied Petroleum Gas Market is estimated to grow at a significant CAGR of 3.6% over the forecast period as the scope and its applications are rising enormously across the globe.

 

Micro Turbine Market Size, Trends, Demand and Key Players by 2024

26th November 2019 – ****** Micro Turbine Market is estimated to grow significantly in the forecast period owing to the increasing preference for low emission power generation sources. Micro turbines are relatively new distributed generation technology that is used for stationary energy generation applications. They are combustion turbine that produces both electricity and heat on a relatively small scale. They offer numerous potential advantages as compared to other technologies for small-scale generation.

 

Oil Spill Management Market Share, Consumption and Revenue Forecast by Regions 2025

11th November 2019 – The ****** oil spill management market is expected to cross a higher CAGR during the forecast period. Oil spill waste management results in generation and collection of huge quantities of oily waste. Gravel, emulsified oil, oiled sand, and accumulated debris could raise the waste volume to a greater extent of oil split originally. This waste typically surpasses the management of oily waste and response-relevant wastes can turn more time demanding and incur significant costs of an oil spill. Management of waste from a spill comprises setting up of logistical arrangement to allocate waste in a safe and efficient manner from the recovery point to disposal.

Artificial Lift Systems Market Size, Demands and Growth Prediction By 2025

7th November 2019 – The ****** artificial lift systems market is expected to gain a moderate growth during the forecast period. Artificial lift systems are used to enhance fluid production and transportation from the reservoir to the endpoint. Based on the nature of use, the artificial lift systems are categorized on their operating principle, energy source and design. The primary aim of artificial lift systems is to lessen the weight of hydrostatic column by reducing the density of fluid column resulting into overall lessening of drawdown on reservoir ultimately, so that the formation can exhibit desired reservoir fluid.

 

Marine Powerboats Batteries Market Share, Technical Data and Manufacturing Plants Analysis to 2025

29th November 2018: ****** Marine Powerboats Batteries Market is expected to grow at a significant CAGR in the upcoming years as the scope, Product Types and its applications are increasing across the globe. A powerboat is a marine vessel is motorized by an engine. For the ignition of the engine the marine powerboat batteries are used and for powering the electrical mechanisms of the boat lights, marine electrical panels and fuse blocks are used. There are two types of batteries used; viz lithium-ion batteries and lead-acid batteries. The key components of the marine powerboats are marine batteries.

Gas-to-liquid (GTL) Market Research Report Detailed Analysis and Forecast 2018-2025

23th November 2018: Emerging concerns about fossil fuel depletion along with increasing demand for the alternative sources of energy is projected to fuel the growth for gas to liquid market. Rising demand for FT (Fischer-Tropsch) route so as to monetize the reserves for natural gas which are unavailable and stranded for utilization is expected to catapult the demand for the industry. Rising demand for power and depleting natural reserves from end-use industries from around the world is anticipated to propel the need for alternative energy sources. This, in turn, may significantly drive the market for gas to liquid industry. Rapid demand for conversion of methane-rich to clean synthetic fuels and economic gasses is estimated to spur the growth of GTL technology. The rise of industrial sector primarily in developed and developing countries including India, China, Germany, the United States, the U.K and China have essentially driven the concerns for conventional resource depletion and scarcity. These countries are increasing adopting gas to liquid technology in order to comply with the carbon emission target and regulations by overhauling the fuel efficiency in the operations.

Flywheel Energy Storage Market Outlook 2025: Growth Factors, Trends & Comprehensive Research

13th November 2018 – ****** Flywheel Energy Storage Market is segmented on the basis of type, application, and region. A flywheel energy storage system can be described as a mechanical battery such that it does not create electricity but simply converts and stores the energy in form of kinetic energy until needed. In a matter of seconds, the electricity can be created from the spinning flywheel making it the ideal solution to help regulate supply in the electrical grid. Kinetic energy can be described as “energy of motion,” and in this case the motion of a spinning mass called a rotor. The rotor spins in a nearly frictionless enclosure. When short-term backup power is required since the utility power fluctuates or is lost and the inertia allows the rotor to continue spinning and the resulting kinetic energy is converted to electricity.

DC Contactor Market: Evolving Technology, Trends and Industry Analysis 2025

2nd November 2018 – ****** DC Contactor Market is expected to grow at a higher CAGR in upcoming years. DC Contactors are made up of a high current switch and a solenoid in a single enclosure. The DC Contactors are designed and innovated to control the line of isolation, reversing and regulating function. The switch of the DC Contactors is provided the desired function, to turn the current flow on and off. DC Contactor is a type of electromechanical product that developed and produced for the purpose of high current technology between a power source and a load.

Toroidal Power Transformers Market – Growth and Demand Forecast to 2025 – By Type, End User & Geography

31th October 2018 – ****** Toroidal Power Transformer Market is segmented into application, product and geographical regions. A toroidal transformer has ring type core made from cold rolled grain oriented (CRGO) Silicon steel strip devoid of any joints and annealed for stress relief after being wound. These wound cores are then suitably insulated by class B insulation and the winding of copper wire is usually done by winding machines. In Toroidal Power Transformers the core is permanent, devoid of any air gap and the path of flux being along the direction of grain orientation, gives an occasion for optimum use of flux density, in addition very low iron loss and exciting current. The primary and secondary windings are closely linked magnetically. Therefore, the leakage fluxes and reactance are negligible.

Composite Insulators Market 2025 – ****** Analysis & Forecast Report

17th October 2018– ****** Composite Insulator Market is expected to grow at a significant CAGR in the upcoming years as the scope, product types, and its applications are increasing across the globe. Composite Insulators are also termed as “Silicon rubber insulators” or “Polymer insulators”. A composite insulator includes at least two insulating parts, such as fiberglass core and housing equipped with metal end fittings. Composite insulators are witnessing developing trend. They denote the new technology for electrical insulators.  In addition, as compared to the glass insulators or porcelain a composite insulator has several prominent factors such as being non-brittle and light in weight; due to which construction costs get reduced. It is ideal for use in compact line post insulators, and protection against seismic waves, and contamination.